In mechanical devices, grease fitting is the personal secretary for lubricant. Grease fittings are responsible for delivering lubricant to any part of the machine that needs it. So, how to remove broken grease fitting?
A grease fitting is standard on almost all vehicular engines, including modern cars, boats, and boats. There is one problem, though: The grease fitting is often broken. A wrench is sufficient to remove grease fittings when intact. However, special tools are necessary for removing broken ones. Most types of tools can be used to remove broken grease fittings. Yet there are a few that are most appropriate:
- Screw Extractor.
- Pointy Philip Head.
- Grease Fitting Tools.
Each of the mentioned tools can successfully bring out any broken grease fitting. You can do this using the tools you have.
How To Remove With Screw Extractor
Those who work with basic equipment at home will feel the importance of a Screw Extractor. If any screw gets stuck, or there is not enough grip to hold it, it can be easily removed using Screw Extractor.
In the case of Grease Fitting, the extractor works in the same way. If you have a fitting size extractor, use it.
- First, check the broken grease fitting. Then clean the grease and other lubricants around it as much as possible.
- Then attach it to your drill with a Screw Extractor the size of Grease Fitting.
- Now drill and insert the extractor inside the fitting.
- If your drill has a reverse method, turn the drill in reverse mode and remove the screw extractor. The broken Grease Fitting will come out.
- If the drill does not have a reverse mood, open the drill with the screw inside after drilling.
- Remove the extractor by turning it counterclockwise with a wrench. Then the broken grease fitting will come out with the extractor.
How To Remove With Pointy Philip Head
If you have a Pointy Philip Head, you can use it to pull out any broken Grease Fitting. And You will need no drill to do this. You can have a Pointy Philip Head of different sizes. It would be best for you to use a slightly larger Philip head than fitting.
- First, take Philip’s head and place it on top of the broken fitting. Try to keep it in the middle.
- Then lightly hit the Philip head using a lightweight hammer, and it will be attached to the Grease Fitting.
- Then use any wrench the size of Philip’s head.
- Use the wrench to rotate counterclockwise as before.
- After a while, the completely broken fitting with the Pointy Philip head will come out.
How To Remove With Grease Fitting Tools [Proper Guide]
Grease Fitting Tools are dedicated tools for solving any problem of Grease Fitting. Although different brands of Grease Fitting Tools are available in the market, all of them work in almost the same way. Grease Fitting Tools usually have four parts.
- Part of installing straight fittings.
- Parts of Re-Tapping holes.
- Angel grease fittings installation part.
- Dedicated Screw Extractor for the grease fitting
However, you need to use the Dedicated Screw Extractor part to remove it. It looks just like any other screw extractor. However, since this tool is made for Grease Fitting, it is more convenient to work with it.
- First, place the Screw Extractor part on top of the broken part of the grease fitting.
- Then turn clockwise and insert the extractor into the fitting. If not, hit lightly with a lightweight hammer. The extractor will stick to the broken part.
- Now keep turning the handle of Grease Fitting Tools counterclockwise. The tools will come out with the broken part.
I hope now you understand how to remove broken grease fitting. It isn’t easy, but it can do. You need some patience, a pair of pliers, and some hot water. Follow the steps correctly, and get rid of the broken grease fitting. It will also help prevent future leakages from happening as well.
Cover any spills with newspaper to keep your house clean during this process. The paper should discard once done so that it doesn’t cause an allergic reaction when someone comes in contact with the grease mess left after removing the broken fitting.
What Are Some Of The Best Ways To Remove Broken Grease Fittings?
You can use a cloth soaked in solvent or pliers to remove broken grease fittings. Be careful not to damage the fittings while doing so. Finally, use a plunger to suction onto the fitting and push and pull until it comes off.
How Do I Know If My Grease Fitting Breaks?
If food doesn’t come off with a cloth or brush when you try to clean it, it’s most likely that your grease fitting is broken. Try bending and twisting motions to loosen the stuck-on food to check if this is the case. If that doesn’t work, try using a plunger or bucket to remove it.
What Are Some Tools That I Can Use To Remove Broken Grease Fittings?
If you have broken grease fittings on your property, you may want to use a plunger and bucket. First, use the plunger and bucket to ensure that the area is wet by spraying it down with water. It will help in dislodging the debris more easily. After using the plunger and bucket, make sure to sweep or hose down the area to clean up all of the mess.
Is It Okay To Use Boiling Water To Clean Grease Fittings?
No, boiling water should not use to clean grease fittings. Boiling water can potentially damage grease fittings by breaking them down and causing them to leak. Additionally, bleach and harsh chemicals can also damage grease-fitting surfaces. For regular grease fittings, a stiff brush can use to clean them and let the water run through.
How Can I Fix A Grease Fitting Damaged By Rust Or Corrosion?
If the grease fitting is rusted or corroded, you will need to use a specialized solvent to dissolve the rust and clean it up. After that, apply a coat of sealant and let it dry for at least 24 hours. Then, you can use a brass wire brush to clean any remaining residue.
I am passionate about tools and electric work. I love finding new tools and experimenting with them.